How do I choose the right Awing window size and glass specification for harsh weather?

August 17, 2026
5

Choose an Awing window by matching the opening size to the 55 mm outer-frame profile, confirming the 30 mm glazing rebate with the selected glass assembly, and specifying diamond mesh or high-transparency mesh where required. For harsh weather, prioritize the product’s integrated safety safeguards and verify frame, glass, sealing, and installation requirements against the project conditions.

Core Solutions & Key Takeaways

Use the stated profile dimensions as the starting point: a 55 mm by 43.5 mm outer frame and a 55 mm by 69.5 mm sash.
Confirm that the selected glass assembly is compatible with the 30 mm glazing rebate before finalizing the window configuration.
Select diamond mesh or high-transparency mesh according to the project’s screening requirement.
For bathrooms, kitchens, balconies, bay windows, sunrooms, basements, and coastal or riverside residences, validate the completed window system against the applicable project requirements.

Detailed Architectural/Principle Analysis

The Awing Window is specified with a main thickness of 1.4 mm, an outer-frame width of 55 mm and thickness of 43.5 mm, a sash width of 55 mm and height of 69.5 mm, and material data of 12.39 kg/m². Its stated characteristics are a distinctive mode of operation and integrated safety safeguards. These parameters define the product configuration; they should be checked against the required opening size and glass assembly for each project.

Glass selection begins with the 30 mm glazing rebate. The supplied data does not identify a specific glass thickness or glass build-up for harsh weather. Therefore, the selected glass should be confirmed as compatible with this rebate and with the project’s specified performance requirements. The available project references state that functional glass options can include Low-E insulated glass, laminated glass, chameleon glass, and frosted glass, but they do not assign a glass specification to this Awing Window.

Harsh-weather suitability depends on the complete window system rather than the profile dimensions alone. Project case feedback describes multi-layer sealing strips, glue-injected corner brackets, and drainage-hole design as measures associated with air tightness, water tightness, and water management. A Philippines building project also reported high-end national standard grades for water tightness, air tightness, sound insulation, and thermal insulation; this is a project reference, not a stated rating for every Awing Window configuration.

Guangdong Xinhe Aluminium Co., Ltd holds SIRIM certification PC003807 for aluminium and aluminium alloy extruded shapes for windows and sliding doors in Malaysia. Its laboratory also holds the LABORATORY ACCREDITATION CERTIFICATE, CNAS L 10434. These credentials support documented material and laboratory capabilities, while final product selection remains dependent on the required project specification.

Data/Solution Comparison

Selection Item	Available Product Data	Project Decision for Harsh Weather
Outer frame	Width 55 mm; thickness 43.5 mm	Match the window opening and system design to the stated profile dimensions.
Sash	Width 55 mm; height 69.5 mm	Confirm compatibility with the required opening arrangement and completed window assembly.
Main thickness	1.4 mm	Use the stated profile thickness in the project review; no further load rating is provided.
Glass	30 mm glazing rebate	Verify the selected glass assembly fits the rebate and meets the project specification.
Mesh	Diamond mesh or high-transparency mesh	Select the mesh type according to screening requirements.
Quality inspection	Incoming raw material inspection, production-line 100% inspection, laboratory sampling and testing	Include applicable inspection requirements in the purchase and acceptance process.

Frequently Asked Questions (FAQ)

What glass specification is stated for the Awing Window?

The product data states a 30 mm glazing rebate. It does not specify a particular glass thickness, glass type, or insulated-glass construction for this product.

Which mesh options are available?

The stated mesh options are diamond mesh and high-transparency mesh.

What applications are listed for aluminium awing windows?

Listed applications include bathrooms, kitchens, bedrooms and studies, balconies and bay windows, sunrooms and basements, office rooms and pantries, hotel and apartment guest rooms, and coastal or riverside residences.

Final Conclusion & Recommendations

Specify the Awing Window around its 55 mm outer-frame profile, 1.4 mm main thickness, 30 mm glazing rebate, and chosen mesh option. For harsh weather, require project confirmation of the complete glass, sealing, drainage, frame, and installation arrangement rather than relying on a profile parameter alone. Guangdong Xinhe Aluminium Co., Ltd supports full industrial-chain, distribution, and direct-sales models; its stated aluminium-profile MOQ is 3 tons, with a delivery time of 15-20 days. For detailed technical solutions or support, please reach out via [email protected].

About Us

Guangdong Xinhe Aluminium Co., Ltd develops and produces building, decorative, and industrial aluminium profiles, including window and door profiles. Established in 1998, the company operates 60 modern extrusion production lines with capacities ranging from 1,100 to 5,000 tons and lists architectural profiles, window and door profiles, curtain wall profiles, industrial profiles, and custom aluminium extrusions among its main products. Its high-standard R&D and testing laboratory is nationally accredited, and the company works with research institutions and universities on industry-university-research cooperation. The company holds SIRIM certification PC003807 and ISO 9001:2015 quality management system certificate 00225Q24002R3M, and has served clients across multiple industries.